NACE TM0498-2002
Standard Test Method for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubesstandard by National Association of Corrosion Engineers, 10/01/2002
BS PIP AWS SAIA AWPA ASSE
NACE
Standard Test Method for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubesstandard by National Association of Corrosion Engineers, 10/01/2002
Standard Recommended Practice - Internal Cathodic Protection Systems in Oil-Treating Vesselsstandard by National Association of Corrosion Engineers, 03/01/1995
Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet Hydrogen Sulfide Environmentsstandard by National Association of Corrosion Engineers, 02/12/2004
Joint Surface Preparation Standard: Commercial Blast Cleaningstandard by National Association of Corrosion Engineers, 10/01/1994
Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environmentsstandard by National Association of Corrosion Engineers, 03/27/1998
Standard Recommended Practice - Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanksstandard by National Association of Corrosion Engineers, 11/01/1988
Standard Recommended Practice - Inspection of Linings on Steel and Concretestandard by National Association of Corrosion Engineers, 03/21/2004
Standard Test Method - Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at TemperaturesBelow 93 Degrees C (200 Degrees F)standard by National Association of Corrosion Engineers, 12/01/1993
Standard Test Method - Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environmentstandard by National Association of Corrosion Engineers,
Standard Test Method - Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas…